Pallet Trucks, All Sizes Pallet Trucks $325, 888-661-0845>

Click here to return to Material Handling


  • Sloped and rounded fork nose design
  • User friendly entry and exit rollers
  • Service range is 2-7/8" lowered to 7-3/4" raised.
  • Forks are 48" long and 7" wide
  • Quick lift pump design requires only 12 strokes for full travel
  • 6 degrees articulating wheel assembly for uniform axle loading on uneven floors
  • 20 inch model also available







Full Featured Pallet Trucks

 Model #  Capacity
( Lbs )
Fork Dimensions (inches)   Fork Service Range Weight Price
PM5-27485,500  27482 7/8 to 7¾
280 $328.00
PM5-204820 5/848225$325.00 
PM6-2748  6,000 2748 2 7/8 to 7¾330$455.00
PM10-224510,00022¾45¼3½ to 7 7/8 423$1,425.00
PM5-2748-N5,5002748  2 7/8 to 7¾   316$395.00

The Pallet Truck with Digital Scale allows you to weigh your load on the spot for maximum efficiency. The frame uses heavy-duty steel construction for maximum strength and durability. This model is very user friendly and is suitable for low height lifting. The built-in scale allows you to weigh your load as you are handling it. The scale is selectable in a variety of increments to adjust to the size of your load. It has keyboard calibration and functional setup with automatic zero capabilities. Digital filtering is used to help compensate for vibration and motion to make the Pallet Truck with Digital Scale smooth and accurate. Forks are 7" wide each. Factory calibrated for shipping destination. Scale is powered with 4 C batteries. Series PM-SCL-LP, comes with a AC adaptor. The cord measures 24" long and is coiled (can stretch longer). NTEP approval also available.

Pallet Truck with Digital Scale

 Model#  CapacityFork Dimensions   Fork Service RangeWeight Price
PM-2048-SCL-LP5,000   22 3/8483 to 7½   338$1,550.00
PM-2748-SCL-LP27½48 371$1,620.00
PM-2048-SCL-LP-PT 22 3/848 343$1,871.00
PM-2748-SCL-LP-PT27½48 378$1,871.00 
304 Stainless Steel Pallet Truck with Scale
PM-2748-SCL-LP-SS5,00027½48 3 to 7½410$3,749.00
Legal for Trade Pallet Trucks (NTEP Approved)       
PM-2048-NTEP-SCL-LP5,000 21 7/845¼ 3 to 7½ 270$2,945.00

• Economical • Powder Coat Finish • Quality Built • User Friendly • Low Maintenance Proven ergonomic design has been time-tested for providing years of reliable usable. An economical way for one person to move heavy pallet loads without the use of a fork truck. Ergonomic design requires only 75 lbs. of pulling force when fully loaded. Spring loaded loop handle automatically returns to vertical position when not in use. Chrome-plated hydraulic pump piston for long seal life.

Standard Pallet Trucks

 Model #  CapacityFork Dimensions   Fork Service Range Weight Price
PM5-2748-Y5,500 27482 3/8 to 7¾300$295.00


Galvanized, Zinc and Chrome Plated Designed for corrosive or wet environments these full featured pallet trucks were designed for chemical, pharmaceutical and wash down. Stainless Steel and Stainless Steel Frame & Forks Ideal for sanitary, pharmaceutical, medical, food and wet environments. Choose either 304 stainless steel pallet truck for long life in even the most harsh environments. Application Environments Laboratory Clean Room Wash Down Corrosive Material Handling Features Adjustable Solid Push Rods 180º Turning Radius Options Skid Adaptor Low Temperature Hydraulic Oil

Specialized Pallet Trucks

 Model #  DescriptionFork Dimensions   Fork Service Range Weight Price 
PM5-2048-SSStainless Steel21½452 7/8 to 7¾    300$1,795.00
PM5-2748-SSStainless Steel27   48   327   $1,795.00
PM5-2748-SFFSS Frame/Forks$985.00
PM5-2748-S-ZZinc Coated$445.00

The Low Profile Pallet Truck enters pallets from all four sides. All steel frame is reinforced to handle 4,000 lb. capacity loads. Wide loop control handle with lift, neutral, and lower functions provides fingertip control. Lifetime lubricated bearings. Hydraulic system has hard chrome plated pump piston with polyurethane seals. Suspension system has a heavy-duty thrust bearing. Complete with adjustable push rods, polyurethane wheels, steel load rollers and red powder coated finish.

Low Profile Pallet Trucks

 Model #  Capacity Fork Dimensions   Fork Servive Range  Weight  Price
PM4-2048-LP2,200 20481½ to 3 3/8  313$350.00

Super Low Profile Pallet Trucks

 Model #  Capacity Fork Dimensions   Fork Servive Range  Weight  Price
PM2-2044-SLP2,200 20441½ to 3 3/8  313$425.00

The Wheel Nose Pallet Truck is designed to position pallets or skids closely together. The fork end is set back from the front rollers allowing for one pallet pick up at a time. The unit has a rubber grip handle with a three position lever for easy operation and maneuvering. This heavy-duty unit is rated at 5,000 pounds capacity and has a service range from 3½" to 8". Units include two articulating steering wheels and two front load rollers. Spring loaded loop handle automatically returns to vertical position when not in use. 38" forks are used for maneuvering in tight spaces.

Wheel Nose Pallet Trucks

 Model #  CapacityFork Dimensions   Fork Service Range Weight Price
PM5-2038-WN5,000 2038 3½ to 8 260$375.00
PM5-2738-WN2738 280$395.00
Find us on Google+